Technology

4 smart home mistakes that are slowing down your Wi-Fi

4 smart home mistakes that are slowing down your Wi-Fi


Too much of something can be a bad thing. This is the case for too many sweets and it’s also the case for smart home gadgets in your house. That is, unless you prepare your home for those extra devices so that they aren’t slowing down your Wi-Fi.

Unfortunately, not enough people take the time to fully understand what is needed to put together a smart home. They’ll add a smart TV, some smart bulbs, maybe some cameras, and that’s about it. But as you add more and more items, your internet will suffer. You have to be smart about it and avoid doing a few things to get your home up and running, and keep it that way.

Your Smart TV’s Wi-Fi Problem Might Be Your Router—Here’s How to Fix It

Before you blame your smart TV, try these network tricks to fix your Wi-Fi.

You have a lot of smart home devices on one network

Not all plans have that much bandwidth

You might want to set up a bunch of devices so you can make your life easier. This could include setting up a smart motion sensor to be pointed toward a window that will trigger automation when it sees the sun coming up. You can also have an outdoor smart plug that turns on your Christmas lights at a certain time every day.

Maybe you have a smart washer and dryer that sends you a notification any time they’ve finished a cycle. While all of these can upgrade your home and make your daily tasks more achievable, they do take up bandwidth on your network. Many people will just add them to their regular network and not think much of it.

This can lead to congestion and a slowing of your Wi-Fi. Most home devices, or IoT devices, use a 2.4GHz frequency. Other connections that use 2.4GHz are those that connect to your network using Bluetooth. If you have too many of these, your network is bound to slow down.

Moving as many smart devices to the 5 GHz frequency can improve the speed of them. It can boost the higher bandwidth devices to get more performance out of them. You’ll generally put your phones and computers on 5G because they need a more powerful connection, which frees up some space for other IoT devices to stay on 2.4GHz.

You run your smart home devices and other devices on the same network

You can free up a lot by spreading out the wealth

A Linksys EA8300 router held in hand
Amir Bohlooli / MUO
Credit: Amir Bohlooli / MUO

Again, a common mistake is just adding a smart home device to your network and not thinking much of it. You type in your Wi-Fi name and password, and your device starts working, and you think you’re good to go.

Well, adding too many devices to one network is slowing it down. Because even if you’re only thinking about the smart home gadgets that you have on there, there are a lot of other devices that aren’t considered smart items, too.

If you own a printer, that’s on there. Plus, tons of small devices, like your kids’ story player that you can pause from your phone when it’s time for them to stop (I speak from experience about the Yoto Mini player), or meat thermometers that will give you real-time readings while your meat is on the grill also connect to the network.

What you can do is separate all of your IoT devices into their own VLAN, a separate network away from your main one. This is a common practice when people are hosting other guests and they don’t want them joining their main network and slowing it down. In essence, you’re creating a new network for them to join to keep your main network free. Many routers allow this option in their settings.

If interested in creating a different network for IoT devices, you need to set up a VLAN with its own SSID with some firewall rules to keep the traffic properly separated. This can require a switch for you to designate a specific port as your new place for IoT devices.

You have many devices that use up a lot of bandwidth

Routers can only handle so much

The camera on a Ring Pan-Tilt

Many smart devices don’t take up a ton of bandwidth. Light bulbs, for example, don’t use up much, so you can feel free to add a number of them throughout your house and automate them properly to get the most out of them. But if you have a lot of security cameras, maybe from eufy or Ring, to keep an eye on what’s happening both inside and outside, those are continuously running and recording. They naturally will take up more of the network’s bandwidth.

These are running all the time, so there isn’t a break from their pull on your network. Any time you’re calling on another device to use some of the bandwidth to perform a duty, it’s competing with those devices that are running concurrently.

Routers can only deal with so many concurrently running devices before it inevitably has an effect on the strength of the connections and the speed of the network. This isn’t to say that you shouldn’t have as many cameras as you feel necessary in your home.

Your home’s protection should be your top priority. It’s better to live in a safer environment. But, your smart cameras are no good if they are buffering and lagging. So you need to have the right router and the right bandwidth plan to be able to handle the level of security that you want.

You have an older router that isn’t delivering the best standards

It’s time for an upgrade

Hand holding a Linksys EA8300 router showing the ports on the back side
Amir Bohlooli / MUO

Maybe you’re a bit behind the times. Maybe you have an older router and you haven’t upgraded in a while. If your router is older, you could be doing your network connections a huge disservice.

You’re probably not using Wi-Fi 4, so we can kind of cancel that out. But it’s possible that your router only supports Wi-Fi 5, a usable but slightly outdated wireless standard. If you’re using Wi-Fi 5, you’re using 5G and 2.4GHz bands. You can use them for faster connections and ones that reach up to 3.5 Gbps.

But Wi-Fi 5 isn’t bad. It just can’t handle the kind of traffic that a lot of smart home devices can potentially put on your network, especially if you’re leaving all of your IoT devices on the 2.4GHz band. Wi-Fi 6 and 7 routers are available and can run much faster than Wi-Fi 5.

They can also provide better connections and better reliability, meaning that your smart home devices can run better. Having a better router connection provides more efficiency for your devices. Wi-Fi 6 offers a max speed of 9.6 Gbps and lets more devices connect at the same time. Wi-Fi 6 and 7 aren’t available on every router, so they need to be sought out to boost your ability to properly run your smart home to its fullest potential.

There’s a lot you can do to improve your smart home

Your Wi-Fi network doesn’t need to be empty for you to set up a good and efficient smart home. But you do need to make sure you’re setting it up properly, so you can get the most out of your devices and your network. You don’t want to overload your network and you want to make sure you have the equipment you need for the best version of your Wi-Fi. If you have a lot of devices that use up a lot of bandwidth, you need to prepare for it.



Source link