Aditya Thiru, Senior Automotive Trend Strategist at Advanced Propulsion Centre UK (APC), discusses the challenges and opportunities for the UK automotive manufacturing sector as it transitions to zero-emission vehicles, emphasising the need for efficient technology adoption, local production of high-value components, and identifying productivity gains in established non-BEV commodities
The transition to zero-emission vehicles (ZEVs) and connected and automated mobility (CAM) is not simply a race to invent new technology. It is a race to create technology efficiently, reliably and at scale. For the UK automotive sector, this distinction matters. This transition offers a chance to build new domestic capabilities, but only if innovation translates into competitive production.
UK automotive manufacturing is confronted with an unusually complex combination of pressures: global investment in manufacturing production capacity, strong competition from China, and relatively high industrial energy costs and changing vehicle architectures.
Production volumes remain below their 2019 levels, reflecting these challenges. At the same time, the UK has considerable engineering expertise, an established supplier base and world-class research capabilities. The question is how to convert those advantages into manufacturing decisions that create lasting value.
APC’s recently released insight report, UK Zero Emission Vehicle Manufacturing: Competitiveness and Strategic Priorities for the Sector, examines where improvement potential, supply-chain constraints and market value converge. Its central message is practical: the UK needs to make more of the manufacturing technologies already available, while investing strategically in the capabilities it cannot afford to lack.
Competitive manufacturing begins with understanding where value sits
Electrification is changing the economics of vehicle production. According to APC’s report, an indicative bill-of-materials assessment of a mainstream battery-electric vehicle shows that battery cells, pack integration, electric motors, and power electronics account for roughly two-fifths of vehicle value. That concentration makes electrified powertrains a strategic imperative for domestic capability and investment. Yet this is not only a story about batteries. As vehicles become increasingly software-defined, electronic control units, sensors and related computing hardware are also likely to take on greater strategic importance. This is amplified by the upcoming EU rules of origin and proposed Made in Europe IAA act to localise high-value components from batteries and powertrain technologies.
There is an opportunity to attract investment in these high-value components, particularly where domestic capability can reduce exposure to single-nation-sourced supply chains. However, decisions need to be commercially grounded. A component’s importance does not automatically mean it should be manufactured locally at any cost. The case for UK production must consider efficient use of resources, energy, and skills.
The Government’s DRIVE35 programme and the ambition for annual UK vehicle production to reach 1.3 million by 2035 offer an important strategic context. But production volume, in isolation, is not an adequate measure of success. Competitive factories must also deliver increased productivity, high quality, innovation, and the ability to respond when markets and customer segmentation change.
Find the productivity gains hiding in established components
Some of the most actionable opportunities sit in anchor non-BEV commodities. Seats, interior trim, and wiring harnesses can be labour-intensive, complex to handle and difficult to automate. The report’s supply-chain assessment identifies these areas as promising candidates for R&D, production innovation, and process improvement. Better material handling, machine vision, and more flexible automation and deployment could change the economics of making them – more efficient and profitable for the UK auto assembly plants.
That matters for both competitiveness and resilience. Bulky products incur transport and sequencing costs; sourcing them closer to the production line may offer operational and just-in-time benefits to OEMs. Wiring harnesses provide a different challenge: traditionally, labour-heavy assembly has supported production in lower-cost locations, but technological advances and automation may make targeted reshoring more feasible.
Improvement can also begin at the earliest collaborative design stages. If suppliers are involved earlier, components can be designed for simplified production processes and more efficient use of materials. These choices affect factory costs long before a production line begins operating. For example, design for manufacturing and value engineering can reduce procurement costs, increase quality, and improve customer satisfaction. These are often less visible than a new factory, but they can make a direct contribution to the competitiveness of the vehicle produced in the UK.
The UK also has established supply chain strengths in chassis, steering, braking, and related systems. Supporting these suppliers is as important as pursuing new powertrain investments. An automotive ecosystem depends on networks of specialist manufacturers, not just its largest and most visible plants. The UK must maintain its process capabilities in castings, stampings, and injection mouldings. These processes form the backbone of most critical commodities an automotive plant will need.
Technology exists. Adoption is the harder task
Perhaps the strongest finding from our analysis is that manufacturing competitiveness does not always require a technological breakthrough or enormous capital investment. Many proven tools already exist: manufacturing execution systems (MES), enterprise resource planning (ERP), industrial robots, collaborative robots, automated material movement, and in-line metrology.
These technologies solve different problems. MES and ERP provide the data and operational visibility needed to understand performance and coordinate production. Machine vision and metrology can detect defects earlier. Robotics can improve consistency and reduce repetitive handling. Simulation can help manufacturers test production decisions before committing resources on the shop floor. The greatest benefits arise when systems work together and integrate, rather than through isolated purchases.
APC’s manufacturing technology assessment rates MES and ERP particularly highly because they form a foundation on which more advanced applications can build. Without reliable production data, even promising AI tools struggle to deliver consistent results. It is tempting to focus on high-profile innovations, but better scheduling, traceability, first-pass yield and equipment effectiveness may create more immediate commercial value.
Effective adoption is enabled through digital transformation. First, establish the KPI baseline: what is the current scrap rate, throughput, downtime, or first-pass yield? Second, identify the physical or information bottleneck holding the process back. Third, choose the effective use case that can generate a dependable improvement and test it with operators, engineers, and production managers together.
Our report also distinguishes accessible improvements from those requiring longer-term investment. Collaborative robots, digital work instructions, and targeted inspection tools can provide practical starting points for suppliers. More extensive robotic production lines, advanced joining techniques, and reconfigured platforms demand greater capital investment and careful integration planning. In each case, manufacturers should start by identifying a specific production bottleneck, assessing the potential productivity gain, and building a credible return-on-investment case before committing resources.
Case studies across European manufacturing demonstrate how these approaches can improve inspection coverage, quality, and production efficiency. Such results are context-specific to each operation; they should guide practical experimentation, not be treated as universal promises. The challenge is whether businesses have the data, skills, cybersecurity readiness, and change-management capacity to turn a pilot into a repeatable manufacturing improvement.
Make supply-chain resilience a competitiveness strategy
Supply-chain resilience is increasingly part of the global competitiveness equation. Concentrated sourcing, uncertain lead times, and changing trade requirements can affect investment decisions and operational production costs. The response should be selective: identify which components have the greatest vulnerability, and decide where domestic capacity, supplier diversification, or closer collaboration would make the biggest difference.

The AIMS project’s automated manufacturing cell
Resilience also requires looking beyond immediate suppliers. A component may appear to be sourced from multiple suppliers, yet those suppliers often rely on the same overseas materials, processing facilities, or specialised manufacturing equipment. Better visibility into tier-two and tier-three dependencies can help companies prioritise where alternative capacity or demand aggregation would have the most value.
From ambition to execution
The UK’s opportunity is real, but it will not be secured by a single grant programme, technology purchase, or factory announcement. It requires a joined-up effort: targeted investment in strategic components, support for suppliers adopting proven productivity tools, a workforce equipped for increasingly digital operations, and stronger collaboration across the value chain.
For policymakers and investors, that means recognising the need for different interventions: innovation to develop new technologies and processes, scale-up to bring proven solutions into production, and capital investment to establish or modernise strategic manufacturing capabilities. For industry, it means making productivity improvement a relentless focus, with clear measures of outcomes and objectives. For tier 2 and tier 3 suppliers, it means access to expertise, practical implementation, and financial support.
The UK’s next competitive advantage will come from translating innovation into more productive, resilient manufacturing. The priority now is to apply proven technologies where they make a measurable difference, invest in the capabilities needed for future production, and strengthen collaboration across the supply chain.
The Government’s DRIVE35 programme provides an important mechanism for addressing these challenges, supporting the journey from innovation through to industrialisation. Delivered in partnership with APC and Innovate UK, its Innovation, Scale-up and Transformation funding pillars are designed to support automotive R&D, accelerate adoption of advanced technologies, and attract investment in UK manufacturing capabilities. By connecting technology development with production readiness and capital investment, DRIVE35 can help manufacturers and suppliers turn promising innovation into lasting competitive advantage.”
Source: Advanced Propulsion Centre UK (2026). UK Zero Emission Vehicle Manufacturing: Competitiveness and Strategic Priorities for the Sector. Published 15 October 2026. Available at: APC UK Manufacturing Competitiveness Insight Report.
About the Advanced Propulsion Centre UK
The Advanced Propulsion Centre UK (APC) collaborates with the UK government, the automotive industry, and academia to facilitate driving research and investment in zero-emission vehicle manufacturing. Established in 2013 and jointly funded by the Department for Business, Innovation, Science and Trade (BIST) and the automotive industry, the APC accelerates the development and industrialisation of technologies that enable the transition to zero-emission vehicle manufacturing and a net-zero automotive supply chain in the UK.
Launched in July 2025 and delivered by BIST in partnership with the APC and Innovate UK, the DRIVE35 (Driving Research & Investment in Vehicle Electrification) programme forms a core part of the UK Government’s Advanced Manufacturing Sector Plan. It underpins the UK’s commitment to a zero-emission future, backed by £4bn in grant funding to 2035 for automotive R&D, scale-up, and transformation.
Focus across three funding pillars – Innovation, Scale-up, and Transformation – is helping to build a globally competitive zero-emission vehicle supply chain and deliver safer, smarter, more sustainable, and affordable mobility.
Innovation
Supporting product and process innovation in strategic and disruptive zero-emission vehicle technologies, including digital tools, Software Defined Vehicles, and AI-driven processes.
Scale-up
Accelerating manufacturing by catalysing investment in advanced technologies for zero-emission vehicles, scaling up sustainable production processes.
Through the Innovation and Scale-up funding pillars of DRIVE35, APC currently supports a portfolio of 127 zero-emission projects involving 184 partners. This portfolio represents over £220m of funding. Collectively, these projects are projected to avoid more than 4.2 million tonnes of CO₂e, while strengthening the UK’s long-term automotive capability through collaboration, knowledge sharing, and innovation.
Transformation
Driving capital investment to strengthen an internationally competitive EV supply chain, including upgrading existing plants and establishing new facilities to secure future zero-emission vehicle assembly in the UK.
For more information, visit apcuk.co.uk or follow ‘Advanced Propulsion Centre UK’ on LinkedIn.
Please note, this article will also appear in the 28th edition of our quarterly publication.
